SJ Single Screw Extrusion For PP PE Film Flakes Recycling
Description & Applications:
The machine is mainly used for the extruder of thermoplastic, such
as soft,hard PVC etc. Equipped with the corresponding auxiliary
(Including the forming head), it can process different plastic
productions, such as film, pipe, sheet, board, belt, cable
insulation layer and hollow production and so on, it can also used
Single-screw extruder as a common extruder equipment for the
plastics processing industry, principles, and construct what is it?
Following the delivery from the extruder, compression, metering
section to the principle of single-screw extruder to do an
Single-screw extruder is generally divided into three sections on
the effective length, according to the screw diameter, pitch, screw
depth to determine the effective length of three sections,
generally in proportion to their third division.
Efficient single screw extruder with double cascade overall design,
reinforcing plasticization ensure high-speed high-performance
stable extrusion, special barrier integrated mixing design to
ensure the material mixing effect, high shear and low melting
plasticizing temperature ensure high performance low temperature
and pressure are measured material extrusion. Design concepts and
features: on the basis of high speed straight, high extrusion.
|Name||L/D||Output||Screw rotation Speed||Power||Center Height|
|SJ-65||25:1 30:1||20-80kg/h||20-120r/min||22kw 37kw||1000mm|
|SJ-90||25:1 33:1||30-110kg/h 100-250kg/h||20-120r/min||55kw 90kw||1000mm|
|SJ-120||25:1 30:1||80-200kg/h 150-350kg/h||20-120r/min||75kw 110kw||1000mm|
|SJ-150||25:1 30:1||100-300kg/h 200-500kg/h||20-120r/min||90kw 160kw||1100mm|
REMARK : if the equipment or technological parameters have some
change , we shall not make a notice separately .
1.On the basis of high-quality high-speed, high extrusion.
2. Low-temperature plastics design concepts to ensure high quality
3.Ttwo stages styles unitary design, reinforcing plasticization
capacity guaranteed adjust performance extrusion.
4.Special barriers, comprehensive mixing design to ensure the
material mixing effect.
5.High torque output, the huge thrust bearings.
6.Gears, shafts for high-strength alloy steel, carburizing and
7.Hhigh hardness, high gloss, low noise.
8.PLC intelligent control, can realize the linkage between the main
9. Easy to monitor the human-machine interface, easy to understand
processing and machine status.
10.Control mode can be replaced as needed (temperature control).
11. Made of 38CrMoAL / A nitrogen treatment, wear.
12.Strict temperature control accuracy, air and water cooling
13.Distinctive feeding inlet with water-cooling unit.
14.Bottom with grooved feed sleeve barrel, feed with enhanced
capabilities for high velocity and provide a guarantee.
Single Screw Extruder Machine For PP PE Film Flakes Recycling
1. The machine inspection before delivery in YATONG MACHINERY When you come to our factory .Check everything
is it ok .
2. Free of charge of some necessary spare part.
3. One year guaranteeof all the machines running , if any problem ,we will bear. Of
course if the machines after one year ,you also can ask for the
4. 1-2 technical engineers will be come to your factory to
installation and commissioningthe machines and train your workers
if you need.
5. We accept 30% TT down payment, 70% TT or LC at sight before delivery.
6. Film packing or plywood packing suit for sea shipping.
Contact person: Iris